Size Chart Guidelines for Fashion Sellers

Actions required from sellers:
  • Fit-critical fashion products must include a clear and accurate size chart.
  • Use numeric measurements and state the unit, such as cm or inches.
  • Include the measurements required for the product’s specific category.
  • Make sure every selectable size SKU is covered by the size chart.
  • Check the chart again whenever you update a product or its SKUs.
A clear size chart helps customers choose the right product and reduces confusion about fit. This guide explains which products need a size chart, what information to include, how to keep your chart consistent with your SKUs, and how to upload it in Seller Center.

1. Who needs a size chart?

A size chart is required when customers need size, measurement or body-fit information to choose the correct product.
This generally includes:
  • Tops, bottoms, dresses, one-piece garments, sleepwear and outerwear
  • Lingerie and intimates
  • Swimwear and sportswear
  • Shoes and other footwear
  • Fit-critical accessories, including belts, hats, gloves, rings, bangles, earrings, necklaces, bracelets, scarves and shawls
  • Other products whose dimensions affect fit, wearability, comfort or security

2. Minimum requirements

Provide a visible size chart

The size chart may appear in the dedicated Product Size Chart section, product images, product description or description images. Using the dedicated Size Chart Tool is recommended because it makes size information easier to display, manage and reuse.

State measurement units

Every measurement must include a clear unit, such as cm, inches, kg, lb or litres, where relevant. Do not provide measurement numbers without units.

Use clear, product-specific values

Required measurements must be numeric, readable, matched to the relevant size and based on the actual product being sold. Avoid vague statements such as “standard size”, “regular length” or “fits most” when customers need measurements to choose a size.

Include the measurements for the product category

Different product types require different measurements. Follow the requirements for the most specific category selected for the product. A conditional measurement may be omitted only when it genuinely does not apply to the product’s construction.

Keep the chart consistent with selectable SKUs

Every size that customers can select must appear in the size chart or have a clear equivalent mapping. If the SKU uses numeric sizes and the chart uses letter sizes, show how the two systems correspond.
A chart may include additional reference sizes that are not currently offered, provided every selectable SKU is included and the extra sizes are not presented as available for purchase.

Use information for the actual product

Do not upload a generic or unrelated size chart. Check every reused template against the current product’s measurements, fit, cut and selectable SKUs.

Size chart examples

Compare a complete size chart with one that needs improvement.
image
Recommended additions
  • Illustrations showing where measurements are taken
  • Height or weight guidance by size, where appropriate
  • International size equivalents, such as US, UK or EU
  • Notes on stretch, cut or intended fit
Common reasons a listing may fail review
  • No size chart for a fit-critical product
  • Measurements have no units
  • Required category measurements are missing
  • Selectable SKUs do not match the chart
Height and weight fields: Requirements shown in Seller Center may vary by market, category and product type. If Seller Center marks Height or Weight as required, complete those fields before submitting. Unless an exception in Section 5 applies, height or weight guidance does not replace the category-specific measurements below.

3. Required measurements by product type

Use this table as a submission checklist. Where a requirement is conditional, include it whenever the stated condition applies
Product type
Examples
Required measurements or attributes
Image
Tops
T-shirts, blouses, shirts, polo shirts, tunics, hoodies, knitwear, cardigans, vests, turtlenecks and inner tops
Chest or bust measurement, such as armpit-to-armpit, or shoulder width as applicable; sleeve length if the product has sleeves; garment length
image
Pants and similar bottoms
Pants, jeans, trousers, joggers and leggings
Waist; hip; rise; inseam. Outseam is recommended.
image
Shorts
Women’s, men’s and unisex shorts
Waist; hip; at least one leg-length measurement, such as inseam, outseam or garment length. Rise is recommended.
Skirts
Skirts and pantskirts
Waist; hip if fitted through the hip; garment or skirt length
Dresses and one-piece garments
Casual dresses, formal dresses, gamis, abayas, kaftans, jumpsuits, overalls, wedding dresses, nightdresses and swimdresses
Bust; waist; hip; garment length from shoulder to hem; sleeve length if the product has sleeves
image
Lingerie and intimates — tops
Bras, bralettes and sports bras
Cup-sized bras: underbust or band size and cup size. Non-cup-sized bras: bust and underbust, or an equivalent size mapping.
image
Lingerie and intimates — bottoms
Panties, shapewear, lingerie and bodysuits
Waist and/or hip measurement, as appropriate for the product
image
Sleepwear and loungewear
Pajamas, robes, onesies, nightdresses and family clothing sets
Follow the relevant top and/or bottom requirements. Include garment length and waist/hip measurements where applicable.
image
Outerwear
Jackets, coats and sports outerwear
Chest or bust; shoulder width; sleeve length; garment length
image
Swimwear
Bikinis, tankinis, one-pieces, Islamic swimwear and cover-ups
Bust; waist; hip; torso length from shoulder to crotch for one-piece swimwear; underbust and cup size for cup-sized bikini tops
image
Shoes and footwear
Sandals, flip-flops, trainers, running shoes, heels, flats, slippers, boots and work footwear
Foot length or a size-to-foot-length mapping; width when the SKU offers width variants or the listing claims a narrow or wide fit; heel height for heels
Bags
Crossbody bags, tote bags, clutches, backpacks, travel bags, luggage and wallets
Length, width and height; strap-drop length where the product has a strap; capacity, such as litres or a stated document or laptop size
image
Fashion accessories
Scarves, shawls, necklaces, bracelets, bangles, rings, earrings, hats, sunglasses, belts and gloves
Circumference or length for products such as belts, bracelets, necklaces, hats, scarves and shawls; diameter for rings, bracelets, bangles and earrings; frame width for glasses; product size where applicable
Sportswear
Sports tops, bottoms, dresses, rashguards, sports bras and swim shorts
Follow the relevant top, bottom or dress requirements; compression level and fabric stretch or elasticity where applicable

4. Keep SKUs and the size chart consistent

Acceptable examples

  • SKUs: S, M and L. Size chart: S, M, L and XL. This is acceptable if XL is not presented as available for purchase.
  • SKUs: EU 36, 37 and 38. Size chart: EU 36, 37 and 38 mapped to foot length in cm.

Examples that must be corrected

  • SKUs include XS and XL, but the size chart only shows S, M and L.
  • SKUs use sizes 26, 28 and 30, but the chart only shows S, M and L without a mapping.
  • The SKU is Free Size, but the chart presents several sizes without explaining which one applies.
  • The title states that sizes S–XXL are available, but customers can only select S–XL.
If you add, remove or rename a size SKU, review the size chart and all size-related claims in the title, description and images at the same time.

5. When may an exemption apply?

5.1 Non-fit-critical accessories

A non-fit-critical accessory may be exempt from the size-chart requirement only when all of the following apply:
  • It is not worn in direct dependence on body fit.
  • It does not rely on a body-part measurement for wearability, security or comfort.
  • Basic product dimensions are provided where customers need them.
Products such as handbags, wallets and some sunglasses may qualify if all conditions are met. Follow any required fields shown in Seller Center.
The exemption does not apply to scarves, shawls, belts, hats, gloves, rings, bangles, earrings, necklaces, bracelets, shoes or other footwear. These products remain fit-critical even when described as adjustable, stretchy, open-ended or one size.

5.2 Measurements that do not apply

A conditional measurement does not need to be provided when it is genuinely irrelevant to the product design. For example, sleeve length does not apply to a sleeveless top. This exception does not apply when a relevant measurement has simply been omitted.

6. How to upload a size chart

Refer to the article Size Chat Specification for more information.

Option 1: Upload a size chart image

  1. Go to Seller Center > Products > Manage Products > Add New Product.
  2. Find the Product Size Chart section and select Upload Image.
    image
  3. Upload a PNG, JPG or JPEG image that is at least 600 × 600 pixels and smaller than 5 MB.
  4. Confirm the image is readable and includes the applicable size labels, measurements and units.
  5. Preview the image and check that no information is cropped or blurred.

Option 2: Use the Size Chart Tool

  1. Go to Seller Center > Products > Manage Products > Add New Product.
  2. Select Use Size Chart Tool, then click Add New Size Chart.
    image
  3. Enter a clear chart name, such as “Women’s Dress Size Chart”.
    image
  4. Add the sizes, required measurements and units.
  5. Select Save as template if you want to reuse the chart.
  6. Click Submit, then review the preview before completing the product listing.
    image

Option 3: Add size charts in batch

  1. Open the product Batch Tool and create or locate the correct size chart template.
    image
  2. Copy the size chart template ID.
    image
  3. Paste the template ID into the corresponding size-chart column in the batch-upload spreadsheet.
    image
  4. Confirm the template matches the actual product and covers every selectable SKU before upload.
Menu names and available tools may vary slightly by market. Follow the fields and prompts shown in your Seller Center.

7. Seller checklist before listing

Make sure the following requirements are met before you list your products:
  • The product has a size chart
  • The chart is visible and easy to read
  • Every measurement has a clear unit
  • Measurements contain numeric values rather than vague descriptions
  • All required category measurements are included.
  • Every selectable size SKU appears in the chart or has a clear equivalent mapping
  • The title, description, images, SKUs and size chart do not contradict one another
  • The measurements reflect the actual product being sold
  • Conditional information is included when applicable
  • Any Height or Weight field marked as required in Seller Center is complete
  • The chart preview is not blurred, cropped or too small to read
  • Any reused template has been checked against the current product

8. Frequently asked questions

Can I upload a size chart as an image?

Yes. Sellers can upload a clear PNG, JPG or JPEG image in the Product Size Chart section. However, we strongly recommend using the Size Chart Tool whenever it is available to create a structured, reusable size chart. If you upload an image, it should be at least 600 × 600 pixels, smaller than 5 MB, and include all required measurements and units.

Can I put the size chart in the product description or product images?

Yes. You may also include a size chart in the product description or product images as supporting information. However, do not rely on these locations alone. We strongly recommend adding and maintaining the main size chart through the dedicated Product Size Chart section or Size Chart Tool so buyers can find it more easily and sellers can manage, reuse and update it efficiently. Any size information shown elsewhere must stay consistent with the main size chart and selectable SKUs.

Can I edit an existing size chart template?

Yes. Go to Batch Manage Size Charts > Manage Templates > Edit. After editing, check every product using the template to make sure it still matches the product’s SKUs and actual measurements.

Can I reuse one template for multiple products?

Yes, but only when the products genuinely share the same measurements and sizing. Do not reuse a generic chart for products with different cuts, dimensions or sizing.

Are Height and Weight mandatory?

Complete Height or Weight whenever Seller Center marks the field as required for your market and category. Unless an exception in Section 5 applies, height and weight guidance does not replace the category-specific measurements in this guide.

Can weight recommendations replace bust, waist or hip measurements?

Only for eligible lingerie and intimate products. The listing must map a stated weight or weight range to a recommended size and include the weight unit.

Can my size chart show sizes that are not currently available?

Yes, provided every selectable SKU is included and the additional sizes are not presented as available for purchase.

What if my SKUs and size chart use different sizing systems?

Provide a clear mapping. For example, map numeric sizes to letter sizes or EU shoe sizes to foot length in centimetres. Customers should not need to guess the equivalent size.

What happens if the size chart is missing or incorrect?

A fit-critical listing may fail review when the size chart is missing, incomplete, inconsistent with the SKUs or unrelated to the actual product. Correct the information before submitting or updating the listing.
Final check for sellers: A compliant size chart is visible, uses numeric values and units, contains the measurements needed for the product category, matches every selectable SKU and reflects the actual product.